Werma Aspen

delon Werma Timber

  Aspen (genus Populus) is a white and soft wood, but fairly strong, and has low flammability. It has a density of 28 lbs/ft3 (450 kg/m3). It has a number of uses, notably for making matches and paper where its low flammability makes it safer to use than most other woods. Heat-treated aspen is a popular material for the interiors …

Werma Fir

delon Werma Timber

Fir (genus Abies) is easy to work with and finishes well. It has a density of 26 lbs/ft3 (415 kg/m3) and is light in weight. Fir has a low resistance to decay but is uniform in texture. It is non-resinous and has moderate shrinkage. It is used in furniture, doors, frames, windows, plywood, veneer, general millwork and interior trim. Density: …

Werma Pine

delon Werma Timber

PineĀ is a softwood which grows in most areas of the Northern Hemisphere. It has a density of 28 lbs/ft3 (450 kg/m3). Pine is a soft, white or pale yellow wood which is light weight, straight grained and lacks figure. It resists shrinking and swelling. Pine is often used for country or provincial furniture. Density: 28 lbs/ft3 (450 kg/m3) Light weight …

Werma Ash

delon Werma Timber

Ash (genus Fraxinus) is a hard, heavy, ring porous hardwood. It has a density of 42 lbs/ft3 (680 kg/m3). It has a prominent grain that resembles oak, and a white to light brown color. Ash is widely used for structural frames and steam bent furniture pieces. It is often less expensive than comparable hardwoods. Density: 42 lbs/ft3 (680 kg/m3) Found …

Werma Alder

delon Werma Timber

Alder (genus Alnus) is a hardwood belonging to the birch family Betulaceae. It has a density of 31lbs/ft3 (495 kg/m3). Alder is appreciated for its claimed tight and even balanced tone. As a hardwood, alder is used in making furniture, cabinets, wood crafting and other woodworking products. Alder is cheaper in comparison to other European hardwoods. Density: 31lbs/ft3 (495 kg/m3) …

Werma Maple

delon Werma Timber

Maple (genus Acer) has a density of 44 lbs/ft3 (705 kg/m3). It can be worked and sawn in any direction. Maple is so hard and resistant to shocks that it is often used for bowling alley floors. Apart from bowling alley, it is used for making musical instruments, furniture, joinery, wood flooring and parquetry, and because it is non-staining, is …

Werma Larch

delon Werma Timber

Larch (genus Larix) is a wood valued for its tough, waterproof, and durable qualities. It has a density of 36 lbs/ft3 (575 kg/m3). It is graded as top quality knot-free timber and is in great demand for building yachts and other small boats, for exterior cladding of buildings, and interior paneling. This timber is resistant to rot when in contact …

Werma Beech

delon Werma Timber

Beech (genus Fagus) is a hard, strong, heavy wood with tiny pores and large conspicuous medullary rays, similar in appearance to maple. It has a density of 44 lbs/ft3 (710 kg/m3). This relatively inexpensive wood has reddish brown heartwood and light sapwood. Beech is often used for frames, flooring, boatbuilding, furniture and cabinetry. Density: 44 lbs/ft3 (710 kg/m3) One of …

Werma Oak

delon Werma Timber

WERMA Oak: Oak (genus Quercus) is the most widely used hardwood worldwide. It has a density of about 47 lbs/ft3 (750 kg/m3) creating great strength and hardness. The wood is very resistant to insect and fungal attack because of its high tannin content. It is commonly used for furniture making and flooring, timber frame buildings, and for veneer production. Density: …